1 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change memory back-up capacitors next series nic p/n capacitance value (f) charge discharge rated voltage (vdc) max. current @ 30 minutes (ma) max. esr @ 1khz () typical dcr () next104z5.5v11.5x8.5f 0.10 0.14 5.5 < 0.15 <16 23 next224z5.5v14.5x12f 0.22 0.28 5.5 <0.33 <10 16 next474z5.5v16.5x13f 0.47 0.60 5.5 <0.71 <6.5 5.4 next105z5.5v21.5x13f 1.0 1.3 5.5 <1.5 <3.5 2.9 next225z5.5v28.5x14f 2.2 2.8 5.5 <3.3 <1.8 2.1 next335z5.5v36.5x15f 3.3 4.2 5.5 <5.0 <1.0 1.3 next565z5.5v44.5x17f 5.6 7.2 5.5 <8.4 <0.6 0.8 rated voltage range 5.5vdc rated capacitance range 0.1f ~ 5.6f (100,000f ~ 5,600,000f) operating temp. range -40c ~ +85c capacitance tolerance +80%/-20% (z) load life test @ 85c 1,000 hours capacitance change less than 30% of initial measured value maximum esr less than 200% of the speci ed maximum value current at 30 minutes less than 200% of the speci ed maximum value temperature cycling (5 cycles, -40 ~ +85c capacitance change within +80%/-20% of speci ed value maximum esr less than speci ed maximum value current at 30 minutes less than speci ed maximum value humidity resistance (240 hours @ 40c/90% rh) capacitance change less than 20% of initial measured value maximum esr less than 120% of the speci ed maximum value current at 30 minutes less than 120% of the speci ed maximum value nic p/n dimensions (mm) dh s ll d 1 d 2 next104z5.5v11.5x8.5f 11.5 8.5 5.08 4.1 1.0 0.4 1.2 next224z5.5v14.5x12f 14.5 12.0 5.08 3.4 1.0 0.4 1.2 next474z5.5v16.5x13f 16.5 13.0 5.08 5.1 1.0 0.4 1.2 next105z5.5v21.5x13f 21.5 13.0 7.62 4.5 1.5 0.6 1.2 next225z5.5v28.5x14f 28.5 14.0 10.16 8.0 1.5 0.6 1.4 next335z5.5v36.5x15f 36.5 15.0 15.0 8.7 2.0 0.6 1.7 next565z5.5v44.5x17f 44.5 17.0 20.0 7.5 2.0 1.0 1.4 features ? smaller than nexa series ? double layer construction ? short term power source (up to 50ma) ? suitable for flow soldering ? lead-free finish characteristics standard values and specifications case dimensions (mm) termination finish : pb-free (99%sn/1%cu) + - h max. s 0.5 d 0.5 ll 0.3mm min. d 1 0.1 d 2 0.1 + - super capacitor super capacitor application guide application guide precautions washing is not recommended. additional guidelines and precautions can be found at www.niccomp.com/precautions if in doubt or uncertainty, please review your speci c application - process details with nic?s technical support personnel: tpmg@niccomp.com
|